passedfprime-samd_Drv_UsartDriver_ut_exe0.50s
[STest::Random] Generated seed 825229 from system time
[==========] Running 19 tests from 6 test suites.
[----------] Global test environment set-up.
[----------] 3 tests from Configure
[ RUN ] Configure.Nominal
***************************************
configure() programs the SERCOM once and announces readiness
***************************************
***************************************
(RQ) SAMD21-UART-001: The UsartDriver shall configure SERCOM peripherals for USART operation
***************************************
[ OK ] Configure.Nominal (2 ms)
[ RUN ] Configure.AllParameters
***************************************
configure() forwards every format parameter to the HAL
***************************************
***************************************
(RQ) SAMD21-UART-001: The UsartDriver shall configure SERCOM peripherals with configurable baud rates, data formats, parity, stop bits, bit ordering, communication modes, and clock sources
***************************************
[ OK ] Configure.AllParameters (0 ms)
[ RUN ] Configure.QueuesRxBuffers
***************************************
configure() primes both RX buffers into the RX DMA channel
***************************************
***************************************
(RQ) SAMD21-UART-002: The UsartDriver shall use DMA for both transmission and reception
***************************************
***************************************
(RQ) SAMD21-UART-003: The UsartDriver shall implement double-buffering for continuous RX
***************************************
[ OK ] Configure.QueuesRxBuffers (0 ms)
[----------] 3 tests from Configure (4 ms total)
[----------] 4 tests from Send
[ RUN ] Send.Nominal
***************************************
send() enqueues a TX DMA transaction with correct descriptors
***************************************
***************************************
(RQ) SAMD21-UART-002: The UsartDriver shall use DMA for both transmission and reception
***************************************
***************************************
(RQ) SAMD21-UART-005: The UsartDriver shall queue TX requests with asynchronous completion
***************************************
[ OK ] Send.Nominal (0 ms)
[ RUN ] Send.QueueFull
***************************************
send() returns SEND_RETRY once the TX queue is full
***************************************
***************************************
(RQ) SAMD21-UART-005: The UsartDriver shall queue TX requests with asynchronous completion (a full queue returns SEND_RETRY)
***************************************
[ OK ] Send.QueueFull (0 ms)
[ RUN ] Send.Completion
***************************************
TX DMA completion returns the buffer OP_OK via activeIn
***************************************
***************************************
(RQ) SAMD21-UART-005: The UsartDriver shall queue TX requests with asynchronous completion (the buffer is returned OP_OK from the main context)
***************************************
[ OK ] Send.Completion (0 ms)
[ RUN ] Send.ChannelError
***************************************
TX DMA bus error asserts (invalid buffer pointer handed to DMA)
***************************************
***************************************
(RQ) SAMD21-UART-002: The UsartDriver shall use DMA for transmission (an unrecoverable TX DMA bus error asserts)
***************************************
[ OK ] Send.ChannelError (238 ms)
[----------] 4 tests from Send (240 ms total)
[----------] 1 test from SendSync
[ RUN ] SendSync.Nominal
***************************************
sendSync() transmits synchronously through the HAL with no DMA
***************************************
***************************************
(RQ) SAMD21-UART-006: The UsartDriver shall provide synchronous blocking transmission for early boot diagnostics
***************************************
[ OK ] SendSync.Nominal (0 ms)
[----------] 1 test from SendSync (0 ms total)
[----------] 8 tests from Rx
[ RUN ] Rx.SchedInNoData
***************************************
schedIn with no new bytes forwards nothing downstream
***************************************
***************************************
(RQ) SAMD21-UART-004: The UsartDriver shall poll the in-progress RX transfer on each rate group tick (no new bytes yields no signal and no recv)
***************************************
[ OK ] Rx.SchedInNoData (0 ms)
[ RUN ] Rx.SchedInPartial
***************************************
schedIn forwards newly-received bytes and emits RxPartial
***************************************
***************************************
(RQ) SAMD21-UART-004: The UsartDriver shall poll the in-progress RX transfer on each rate group tick to extract partial RX frames
***************************************
[ OK ] Rx.SchedInPartial (0 ms)
[ RUN ] Rx.SchedInRxOverflow
***************************************
schedIn detects a SERCOM RX overflow and counts it in telemetry
***************************************
***************************************
(RQ) SAMD21-UART-004: The UsartDriver shall detect a SERCOM RX hardware overflow on each rate group tick and count it in the rxOverflows telemetry channel
***************************************
[ OK ] Rx.SchedInRxOverflow (0 ms)
[ RUN ] Rx.MultiplePartials
***************************************
successive partials advance the processed offset
***************************************
***************************************
(RQ) SAMD21-UART-004: The UsartDriver shall poll the in-progress RX transfer on each rate group tick (repeated partials advance the buffer offset)
***************************************
[ OK ] Rx.MultiplePartials (0 ms)
[ RUN ] Rx.BufferDone
***************************************
a completed RX buffer forwards the full buffer and emits RxFull
***************************************
***************************************
(RQ) SAMD21-UART-003: The UsartDriver shall implement double-buffering for continuous RX (a full buffer drains its remainder)
***************************************
[ OK ] Rx.BufferDone (0 ms)
[ RUN ] Rx.BufferFlip
***************************************
the active RX buffer flips A->B->A on completion
***************************************
***************************************
(RQ) SAMD21-UART-003: The UsartDriver shall implement double-buffering for continuous RX (the active buffer flips A->B->A on completion)
***************************************
[ OK ] Rx.BufferFlip (0 ms)
[ RUN ] Rx.RecvReturnIn
***************************************
recvReturnIn is a no-op; buffers remain owned by the DMA
***************************************
***************************************
(RQ) SAMD21-UART-003: The UsartDriver shall implement double-buffering for continuous RX (returned buffers stay in the DMA chain)
***************************************
[ OK ] Rx.RecvReturnIn (0 ms)
[ RUN ] Rx.ChannelError
***************************************
RX DMA bus error asserts (invalid buffer pointer handed to DMA)
***************************************
***************************************
(RQ) SAMD21-UART-002: The UsartDriver shall use DMA for reception (an unrecoverable RX DMA bus error asserts)
***************************************
[ OK ] Rx.ChannelError (212 ms)
[----------] 8 tests from Rx (217 ms total)
[----------] 2 tests from Unconfigured
[ RUN ] Unconfigured.SchedIn
***************************************
schedIn before configure() is a safe no-op
***************************************
***************************************
(RQ) SAMD21-UART-004: The UsartDriver shall poll the in-progress RX transfer on each rate group tick (a tick before configure() is a no-op)
***************************************
[ OK ] Unconfigured.SchedIn (0 ms)
[ RUN ] Unconfigured.ActiveIn
***************************************
activeIn before configure() is a safe no-op
***************************************
***************************************
(RQ) SAMD21-UART-005: The UsartDriver shall queue TX requests with asynchronous completion (an activeIn tick before configure() delivers nothing)
***************************************
[ OK ] Unconfigured.ActiveIn (0 ms)
[----------] 2 tests from Unconfigured (1 ms total)
[----------] 1 test from TriggerSource
[ RUN ] TriggerSource.Mapping
***************************************
each SERCOM maps to its matching RX DMA trigger source
***************************************
***************************************
(RQ) SAMD21-UART-002: The UsartDriver shall use DMA for both transmission and reception (the correct DMA trigger is selected per SERCOM)
***************************************
[ OK ] TriggerSource.Mapping (0 ms)
[----------] 1 test from TriggerSource (1 ms total)
[----------] Global test environment tear-down
[==========] 19 tests from 6 test suites ran. (466 ms total)
[ PASSED ] 19 tests.