passedfprime-samd_Svc_Seq_ut_exe0.06s
[STest::Random] Generated seed 961771 from system time
[==========] Running 27 tests from 5 test suites.
[----------] Global test environment set-up.
[----------] 10 tests from SequenceExecution
[ RUN ] SequenceExecution.GenericSequence
***************************************
Execute the GENERIC action end to end, verifying command order, args, and byte offsets.
***************************************
***************************************
(RQ) SAMD21-SEQ-001
***************************************
***************************************
(RQ) SAMD21-SEQ-002
***************************************
[ OK ] SequenceExecution.GenericSequence (2 ms)
[ RUN ] SequenceExecution.RunCommandPendsUntilActive
***************************************
RUN latches a pending request that only starts on the next idle activeIn tick.
***************************************
***************************************
(RQ) SAMD21-SEQ-004
***************************************
[ OK ] SequenceExecution.RunCommandPendsUntilActive (0 ms)
[ RUN ] SequenceExecution.ImmediateDispatchOrder
***************************************
Back-to-back commands dispatch one per activeIn tick, gated by command responses.
***************************************
***************************************
(RQ) SAMD21-SEQ-001
***************************************
***************************************
(RQ) SAMD21-SEQ-002
***************************************
[ OK ] SequenceExecution.ImmediateDispatchOrder (0 ms)
[ RUN ] SequenceExecution.CommandFailureAborts
***************************************
A failing command response aborts the remainder of the sequence.
***************************************
***************************************
(RQ) SAMD21-SEQ-003
***************************************
[ OK ] SequenceExecution.CommandFailureAborts (0 ms)
[ RUN ] SequenceExecution.StrayResponseDropped
***************************************
A command response received while idle is dropped and logged.
***************************************
[ OK ] SequenceExecution.StrayResponseDropped (0 ms)
[ RUN ] SequenceExecution.PendingRunAfterCompletion
***************************************
A RUN issued mid-sequence is latched and runs after the current sequence completes.
***************************************
***************************************
(RQ) SAMD21-SEQ-004
***************************************
[ OK ] SequenceExecution.PendingRunAfterCompletion (0 ms)
[ RUN ] SequenceExecution.InvalidCmdSizeFails
***************************************
A command whose cmdSize is smaller than a bare opcode emits InvalidSequence.
***************************************
***************************************
(RQ) SAMD21-SEQ-008
***************************************
[ OK ] SequenceExecution.InvalidCmdSizeFails (0 ms)
[ RUN ] SequenceExecution.CmdSizeOverrunsBufferFails
***************************************
A command whose cmdSize runs past the action buffer emits InvalidSequence.
***************************************
***************************************
(RQ) SAMD21-SEQ-008
***************************************
[ OK ] SequenceExecution.CmdSizeOverrunsBufferFails (0 ms)
[ RUN ] SequenceExecution.EmptyAction
***************************************
A zero-length action is a valid empty sequence: it finishes immediately with no warning.
***************************************
[ OK ] SequenceExecution.EmptyAction (2 ms)
[ RUN ] SequenceExecution.TruncatedCmdSizeFails
***************************************
A command truncated within the cmdSize field emits InvalidSequence.
***************************************
***************************************
(RQ) SAMD21-SEQ-008
***************************************
[ OK ] SequenceExecution.TruncatedCmdSizeFails (1 ms)
[----------] 10 tests from SequenceExecution (11 ms total)
[----------] 3 tests from WaitTicks
[ RUN ] WaitTicks.ZeroResumesNextTick
***************************************
WAIT_TICKS(0) resumes the sequence on the very next rate-group tick.
***************************************
***************************************
(RQ) SAMD21-SEQ-006
***************************************
[ OK ] WaitTicks.ZeroResumesNextTick (0 ms)
[ RUN ] WaitTicks.BlocksNTicks
***************************************
WAIT_TICKS(n) blocks for exactly n rate-group ticks, then resumes.
***************************************
***************************************
(RQ) SAMD21-SEQ-006
***************************************
[ OK ] WaitTicks.BlocksNTicks (0 ms)
[ RUN ] WaitTicks.AtEndOfSequence
***************************************
A WAIT_TICKS at the end of a sequence finishes cleanly without a spurious InvalidSequence.
***************************************
***************************************
(RQ) SAMD21-SEQ-006
***************************************
[ OK ] WaitTicks.AtEndOfSequence (0 ms)
[----------] 3 tests from WaitTicks (2 ms total)
[----------] 4 tests from WaitUntil
[ RUN ] WaitUntil.SleepsUntilTime
***************************************
WAIT_UNTIL sleeps until the FSW clock reaches the requested time.
***************************************
***************************************
(RQ) SAMD21-SEQ-006
***************************************
[ OK ] WaitUntil.SleepsUntilTime (0 ms)
[ RUN ] WaitUntil.WakesOnExactTime
***************************************
WAIT_UNTIL wakes when the FSW clock exactly equals the requested time.
***************************************
***************************************
(RQ) SAMD21-SEQ-006
***************************************
[ OK ] WaitUntil.WakesOnExactTime (0 ms)
[ RUN ] WaitUntil.PastResumesImmediately
***************************************
WAIT_UNTIL whose requested time is already past resumes on the next schedIn tick.
***************************************
***************************************
(RQ) SAMD21-SEQ-006
***************************************
[ OK ] WaitUntil.PastResumesImmediately (0 ms)
[ RUN ] WaitUntil.MismatchedBaseNeverWakes
***************************************
WAIT_UNTIL on a time base the FSW clock never reports never wakes.
***************************************
***************************************
(RQ) SAMD21-SEQ-006
***************************************
[ OK ] WaitUntil.MismatchedBaseNeverWakes (0 ms)
[----------] 4 tests from WaitUntil (3 ms total)
[----------] 4 tests from RunOnError
[ RUN ] RunOnError.StartsRecovery
***************************************
RUN_ON_ERROR arms a recovery table that starts after a command failure.
***************************************
***************************************
(RQ) SAMD21-SEQ-005
***************************************
[ OK ] RunOnError.StartsRecovery (0 ms)
[ RUN ] RunOnError.NotTriggeredOnSuccess
***************************************
RUN_ON_ERROR does not trigger when the sequence completes successfully.
***************************************
***************************************
(RQ) SAMD21-SEQ-005
***************************************
[ OK ] RunOnError.NotTriggeredOnSuccess (0 ms)
[ RUN ] RunOnError.ClearsPendingRun
***************************************
Issuing RUN_ON_ERROR clears any pending normal RUN.
***************************************
***************************************
(RQ) SAMD21-SEQ-005
***************************************
[ OK ] RunOnError.ClearsPendingRun (0 ms)
[ RUN ] RunOnError.IsOneShot
***************************************
The armed recovery is one-shot: a second failure does not re-trigger it.
***************************************
***************************************
(RQ) SAMD21-SEQ-005
***************************************
[ OK ] RunOnError.IsOneShot (0 ms)
[----------] 4 tests from RunOnError (3 ms total)
[----------] 6 tests from Cancel
[ RUN ] Cancel.WhileSleeping
***************************************
CANCEL while a WAIT is sleeping stops the sleep; schedIn no longer dispatches.
***************************************
***************************************
(RQ) SAMD21-SEQ-007
***************************************
[ OK ] Cancel.WhileSleeping (0 ms)
[ RUN ] Cancel.WhileAwaitingResponse
***************************************
CANCEL while awaiting a response stops execution; the late response is dropped as stray.
***************************************
***************************************
(RQ) SAMD21-SEQ-007
***************************************
[ OK ] Cancel.WhileAwaitingResponse (0 ms)
[ RUN ] Cancel.ClearsPendingRun
***************************************
CANCEL clears a pending RUN so it does not start on the next activeIn.
***************************************
***************************************
(RQ) SAMD21-SEQ-007
***************************************
[ OK ] Cancel.ClearsPendingRun (0 ms)
[ RUN ] Cancel.ResetsToStart
***************************************
A RUN after CANCEL re-executes the sequence from the first command.
***************************************
***************************************
(RQ) SAMD21-SEQ-007
***************************************
[ OK ] Cancel.ResetsToStart (0 ms)
[ RUN ] Cancel.WhileIdleNoOp
***************************************
CANCEL while idle with nothing pending is a harmless no-op.
***************************************
***************************************
(RQ) SAMD21-SEQ-007
***************************************
[ OK ] Cancel.WhileIdleNoOp (0 ms)
[ RUN ] Cancel.ClearsRunOnError
***************************************
CANCEL clears an armed RUN_ON_ERROR recovery table.
***************************************
***************************************
(RQ) SAMD21-SEQ-007
***************************************
[ OK ] Cancel.ClearsRunOnError (0 ms)
[----------] 6 tests from Cancel (4 ms total)
[----------] Global test environment tear-down
[==========] 27 tests from 5 test suites ran. (24 ms total)
[ PASSED ] 27 tests.