passedfprime-samd_Drv_GpioDriver_ut_exe0.04s
[STest::Random] Generated seed 84544 from system time
[==========] Running 13 tests from 2 test suites.
[----------] Global test environment set-up.
[----------] 7 tests from Nominal
[ RUN ] Nominal.testConfigureOutput
***************************************
(RQ) GPIO-001: configureOutput shall bind the instance to one group/pin and forward the configuration to the PORT peripheral
***************************************
[ OK ] Nominal.testConfigureOutput (0 ms)
[ RUN ] Nominal.testConfigureInput
***************************************
(RQ) GPIO-001: configureInput shall bind the instance to one group/pin and forward the configuration to the PORT peripheral
***************************************
***************************************
(RQ) GPIO-002: configureInput shall select a pull-up, pull-down, or no internal resistor via InputPullMode
***************************************
[ OK ] Nominal.testConfigureInput (0 ms)
[ RUN ] Nominal.testConfigureAllPins
***************************************
(RQ) GPIO-001: configureOutput shall bind the instance to any one group/pin combination
***************************************
[ OK ] Nominal.testConfigureAllPins (0 ms)
[ RUN ] Nominal.testWriteNominal
***************************************
(RQ) GPIO-003: gpioWrite shall set the pin logic level and return OP_OK when the pin is configured as an output
***************************************
[ OK ] Nominal.testWriteNominal (0 ms)
[ RUN ] Nominal.testReadNominal
***************************************
(RQ) GPIO-004: gpioRead shall return the pin logic level and OP_OK when the pin is configured as an input
***************************************
[ OK ] Nominal.testReadNominal (0 ms)
[ RUN ] Nominal.testConfigureInputExternalInterrupt
***************************************
(RQ) GPIO-007: configureInput shall, when ExternalInterruptMode is not NONE, configure the EIC to detect the selected edge(s) on the pin's EXTINT line
***************************************
[ OK ] Nominal.testConfigureInputExternalInterrupt (0 ms)
[ RUN ] Nominal.testInterruptFiresWhenConnected
***************************************
(RQ) GPIO-008: On each configured edge, the driver shall emit a cycle on the gpioInterrupt output port when it is connected
***************************************
[ OK ] Nominal.testInterruptFiresWhenConnected (0 ms)
[----------] 7 tests from Nominal (1 ms total)
[----------] 6 tests from OffNominal
[ RUN ] OffNominal.testWriteUnconfigured
***************************************
(RQ) GPIO-005: gpioWrite shall return NOT_OPENED if invoked before configureOutput
***************************************
[ OK ] OffNominal.testWriteUnconfigured (0 ms)
[ RUN ] OffNominal.testReadUnconfigured
***************************************
(RQ) GPIO-005: gpioRead shall return NOT_OPENED if invoked before configureInput
***************************************
[ OK ] OffNominal.testReadUnconfigured (0 ms)
[ RUN ] OffNominal.testWriteWrongMode
***************************************
(RQ) GPIO-006: gpioWrite on an input pin shall return INVALID_MODE without touching hardware
***************************************
[ OK ] OffNominal.testWriteWrongMode (0 ms)
[ RUN ] OffNominal.testReadWrongMode
***************************************
(RQ) GPIO-006: gpioRead on an output pin shall return INVALID_MODE without touching hardware
***************************************
[ OK ] OffNominal.testReadWrongMode (0 ms)
[ RUN ] OffNominal.testInterruptIsrNoOpWhenDisconnected
***************************************
(RQ) GPIO-008: the driver shall emit a cycle on the gpioInterrupt output port only when it is connected
***************************************
[ OK ] OffNominal.testInterruptIsrNoOpWhenDisconnected (0 ms)
[ RUN ] OffNominal.testInterruptNoDispatchWithoutRegisteredHandler
***************************************
(RQ) GPIO-008: the driver shall emit a cycle on the gpioInterrupt output port only for edges on the pin it configured
***************************************
[ OK ] OffNominal.testInterruptNoDispatchWithoutRegisteredHandler (0 ms)
[----------] 6 tests from OffNominal (0 ms total)
[----------] Global test environment tear-down
[==========] 13 tests from 2 test suites ran. (2 ms total)
[ PASSED ] 13 tests.